Pressure reducing valve - Model T95

mediums:

  • gases
  • liquids

materials:

  • ductile cast iron
  • cast steel
  • stainless steel
  • bronze
  • DN15 to DN40 (1/2“ bis 1 1/2“)
  • PN16 to PN40
  • outlet pressure: 0,5–15 bar
  • for liquids and gases
  • CC480K, CC333G
Pressure reducing valve – Model T95

Pressure reducing valve – Model T95

self-operated, for fluids and gases

The function of pressure reducing valves (pressure regulating valves) is, to reduce a varying or constant upstream pressure (inlet pressure) of the media to a constant reduced pressure (outlet pressure, back pressure) which is depending of the upstream pressure.

The pressure reduction occurs by throttling the free cross section between the seat and the cone. Any change in pressure on the downstream pressure side is immediately converted into a lifting movement of the valve cone.

The valve is well suited for intermittent consumption. At zero consumption, that is, when the consumption on the downstream pressure side is zero, the valve closes safely by low pressure increase.

The pressure reducing valve T95 is suitable for compressible media, e.g. compressed air, natural gas, nitrogen, as well as for incompressible media, e.g. water, oil, fuels, LPG (propane, butane) etc.

They are mainly used in industrial plants, plant engineering and process engineering.

Pressure reducing valves can be supplied with flanges or threaded connections.

datasheet back
Installation length acc. EN 558-1
Model T95

Technical specifications

Installation length acc. EN 558-1

DN1520253240
L(mm)110110110150200
H(mm)175175175230235
h(mm)4545455565
B70707090130
SWSW41SW41SW41SW50SW60
GG1/2G3/4G1G1-1/4G1-1/2

Flanges acc. to (DIN, JIS, ASME, ANSI)

view dimensions