Pressure reducing valve - Model T7

mediums:

  • steam

materials:

  • ductile cast iron
  • cast steel
  • stainless steel
  • DN15 to DN200 (1/2“ bis 8“)
  • PN16 to PN40
  • outlet pressure: 0,5–20 bar
  • for steam
  • EN-JS1030, 1.0619, 1.7357, 1.4408
Pressure reducing valve – Model T7

Pressure reducing valve – Model T7

self-operated, for steam

The function of pressure reducing valves (pressure regulating valves) is, to reduce a varying or constant upstream pressure (inlet pressure) of the steam to a constant reduced pressure (outlet pressure, back pressure) which is independent of the upstream pressure.

The pressure reduction occurs by throttling the free cross section between the seat and cone. Via a pulse line, which is already installed on the valve, the reduced pressure presses on a control piston. As a result, any change in pressure on the downstream pressure side is immediately converted into a lifting movement of the valve cone.

The valve is well suited for intermittent consumption. At zero consumption, that is, when the consumption on the downstream pressure side is zero, the valve closes safely by low pressure increase.

There is no need for additional accessories such as a water seal pot. It is possible to install the valve quick and easy.

They are mainly used in industrial plants, plant engineering and process engineering.

Pressure reducing valves can be supplied with flanges, weld ends or threaded connections.

datasheet back
Installation length acc. EN 558-1
Model T7

Technical specifications

Installation length acc. EN 558-1

DN1520253240506580100125150200
L(mm)130150160180200230290310350400480600
H(mm)435435435435435650690830850750820935
h(mm)9575759095115130160170185205265
B1(mm)65656565658585100120320380505
B2(mm)9090909090110110120130320380505

Flanges acc. to (DIN, JIS, ASME, ANSI)

view dimensions