Pressure reducing valve - Model T65

mediums:

  • gases
  • liquids

materials:

  • ductile cast iron
  • cast steel
  • stainless steel
  • bronze
  • DN15 to DN200 (1/2“ bis 8“)
  • PN16 to PN40
  • outlet pressure: 1–40 bar
  • for liquids and gases
  • EN-JS1030, 1.0619, 1.4408, 1.4410, CC480K, CC333G
Pressure reducing valve – Model T65

Pressure reducing valve – Model T65

self-operated, for fluids and gases

The function of pressure reducing valves (pressure regulating valves) is, to reduce a varying or constant upstream pressure (inlet pressure) of the media to a constant reduced pressure (outlet pressure, back pressure) which is depending of the upstream pressure.

The pressure reduction occurs by throttling the free cross section between the seat and the cone. Any change in pressure on the downstream pressure side is immediately converted into a lifting movement of the valve cone.

At zero consumption, that is, when the consumption on the downstream pressure side is zero, the valve doesn’t close tightly.

The pressure reducing valve T65 is suitable for compressible media, e.g. compressed air, natural gas, nitrogen, as well as for incompressible media, e.g. water, oil, fuels, LPG (propane, butane) etc.

They are mainly used in industrial plants, plant engineering and process engineering.

Pressure reducing valves can be supplied with flanges, weld ends or threaded connections.

datasheet back
Baulängen nach DIN 3202, Gewicht/Stück
Model T65

Technical specifications

Baulängen nach DIN 3202, Gewicht/Stück

DN1520253240506580100125150200
L(mm)130150160180200230290310350400480600
H(mm)290290290290290420445555585745785855
h(mm)9575759095115130160170185205265
B(mm)125125125125130170170195235285320405

Flanges acc. to (DIN, JIS, ASME, ANSI)

view dimensions