Pressure reducing valve - Model T6

mediums:

  • steam

materials:

  • ductile cast iron
  • cast steel
  • stainless steel
  • DN15 to DN200 (1/2“ bis 8“)
  • PN16 to PN40
  • outlet pressure: 1–40 bar
  • for steam
  • EN-JS1030, 1.0619, 1.7357, 1.4408
Pressure reducing valve – Model T6

Pressure reducing valve – Model T6

self-operated, for steam

The function of pressure reducing valves (pressure regulating valves) is, to reduce a varying or constant upstream pressure (inlet pressure) of the steam to a constant reduced pressure (outlet pressure, back pressure) which is depending of the upstream pressure.

The pressure reduction occurs by throttling the free cross section between the seat and the cone. Any change in pressure on the downstream pressure side is immediately converted into a lifting movement of the valve cone.

At zero consumption, that is, when the consumption on the downstream pressure side is zero, the valve doesn’t close tightly.

There is no need for additional accessories such as a water seal pot. It is possible to install the valve quick and easy.

They are mainly used in industrial plants, plant engineering and process engineering.

Pressure reducing valves can be supplied with flanges, weld ends or threaded connections.

datasheet back
Installation length acc. EN 558-1
Model T6

Technical specifications

Installation length acc. EN 558-1

DN1520253240506580100125150200
L(mm)130150160180200230290310350400480600
H(mm)415415415415415590615735765750820935
h(mm)9575759095115130160170185205265
B(mm)125125125125130170170195235320380505

Flanges acc. to (DIN, JIS, ASME, ANSI)

view dimensions